Proper lighting leads to a lot more
possibilities as opposed to when there is none. It is important to get the best
quality of lighting so as to gain the most benefits from it. Lighting affects
everyday life in so many aspects beginning with general illumination and more
serious uses like security.
Security is an important consideration
for any neighborhood. Lack of it causes a reduction in productivity among the
population as they are forced to cut short their projects and head home before
it gets too dark. Insecurity can also affect businesses since property can
easily be stolen in the dark.
The Department of Public Works in the City
of Blythe realized this and decided to take
action. There is a storage yard in this area and they decided to work with Greenshine to light this
facility up and get their security issues in order.
Lots
of power and light
It took two 100W LED
fixtures on each steel pole to begin the
process. Each pole had four 150W solar panels affixed to it. The panels need a
place to store the electrical energy after conversion and so four 200Ah gel
batteries were mounted onto the pole. The batteries were placed in stainless
steel boxes that are lockable.
That is quite a lot of lighting produced
by a single streetlight. Many more were installed of course and this has led to
increased brightness in this area. Workers have a much easier time in this
region since security has been enhanced. It has also been found that brighter
light actually increases the feeling of safety so apart from actually keeping
any predators out, this light makes you feel safer thus increasing your
productivity.
Accuracy
and Flexibility
It is important to note that
installation of lights is dependent on a number of factors to ensure that they
are effective. Photometrics is used to find out how light gets disbursed. This
will give the optimum position to place the poles for proper distribution of
light. If you would like to be able to reach the batteries easily you can ask
to have the battery box fitted a little lower on the pole. This is because
batteries are probably the first thing that will need replacing but even though
it may be a number of years.
Installing a solar
streetlight is very simple, so
much so that you can just read the manual and do it yourself without the help
of any technician or contractor. It also takes a relatively short time so very
little time is wasted.
The lights installed in the above
project are very powerful and can ideally run the whole night. As soon as the
sun begins to set the photosensor in the streetlight takes note of it and the
light goes on. It will stay on until the sun comes out again the next morning
unless there is any problem or the lights have been set to switch off at a
certain time, probably when they are in minimal use.
No comments:
Post a Comment